Check_MK Werk 2434: NetApp monitoring: Cluster-Mode is now supported, changes in existing 7Mode checks

ID: 2434 Title: NetApp monitoring: Cluster-Mode is now supported, changes in existing 7Mode checks Component: Checks & Agents Level: 2 Class: New Feature Version: 1.2.7i4 This update enables to monitor NetApp Filers running in Cluster-Mode. The new <i>agent_netapp</i> is able to automatically detect whether the filer is running in 7Mode or Cluster-Mode, so you only have to configure the credentials in the datasource rule as usual. Some of the existing 7Mode checks have been adjusted. Overall there are now less summary checks available (e.g. fan, temperature, psu). You need to do a service discovery on each NetApp filer. The following table shows the list of available checks and the currently supported NetApp mode. <table> <tr><th>Check</th><th>Description</th><th>7Mode</th><th>Cluster-Mode</th></tr> <tr> <td>netapp_api_aggr</td> <td>Used space and trend of aggregations</td> <td>X</td> <td>X</td></tr> <tr> <td>netapp_api_volumes</td> <td>Used space an trend of volumes. Able to record detailed performance data for each protocol</td> <td>X</td> <td>X</td></tr> <tr> <td>netapp_api_info</td> <td>Displays NetApp version</td> <td>X</td> <td>X</td></tr> <tr> <td>netapp_api_cpu</td> <td>CPU utilization of nodes</td> <td></td> <td>X</td></tr> <tr> <td>netapp_api_cpu.utilization</td> <td>CPU utilization for 7Mode filer</td> <td>X</td> <td></td></tr> <tr> <td>netapp_api_cluster</td> <td>Cluster status</td> <td>X</td> <td></td></tr> <tr> <td>netapp_api_cpu.nvram_bat</td> <td>NVRAM battery status</td> <td></td> <td>X</td></tr> <tr> <td>netapp_api_disk.summary</td> <td>Disk summary check. Includes total raw capacity and info about broken/spare ratio</td> <td>X</td> <td>X</td></tr> <tr> <td>netapp_api_fcp</td> <td>Fibrechannel interfaces traffic and latency</td> <td></td> <td>X</td></tr> <tr> <td>netapp_api_if</td> <td>Ethernet interfaces</td> <td>X</td> <td>X</td></tr> <tr> <td>netapp_api_protocol</td> <td>Read OPS / Write OPS for each protocol (nfs, nfsv4, cifs, fcp, iscsci)</td> <td>X</td> <td></td></tr> <tr> <td>netapp_api_temp</td> <td>Temperature sensors, grouped by shelf</td> <td>X</td> <td>X</td></tr> <tr> <td>netapp_api_psu</td> <td>Power supplies</td> <td>X</td> <td>X</td></tr> <tr> <td>netapp_api_fan</td> <td>Fan status</td> <td>X</td> <td>X</td></tr> <tr> <td>netapp_api_snapvault</td> <td>Snapvault Lag-time</td> <td>X</td> <td></td></tr> <tr> <td>netapp_api_status</td> <td>Diagnosis status</td> <td>X</td> <td>X</td></tr> <tr> <td>netapp_api_vf_stats.traffic</td> <td>vFiler traffic (Read/Write OPS, Net-Data Send/Recv, Read/Write Bytes)</td> <td>X</td> <td></td></tr> <tr> <td>netapp_api_vf_stats</td> <td>CPU utilization of vFilers</td> <td>X</td> <td></td></tr> <tr> <td>netapp_api_vf_status</td> <td>vFiler status, e.g running</td> <td>X</td> <td></td></tr> <tr> <td>netapp_api_vs_status</td> <td>vServer status, e.g running</td> <td></td> <td>X</td></tr> <tr> <td>netapp_api_vs_traffic</td> <td>vServer Traffic Summary</td> <td></td> <td>X</td></tr> </table>