Checkmk werks level1 June 2024

checkmk-werks-lvl1@lists.checkmk.com

1 participants
272 discussions

[2.4.0] Checkmk Werk 16827 created: Fix checkmk errors appearing at the bottom of the page

by Checkmk werks level 1

[//]: # (werk v2) # Fix checkmk errors appearing at the bottom of the page key | value ---------- | --- compatible | yes version | 2.4.0b1 date | 2024-05-28T16:05:26+00:00 level | 1 class | fix component | wato edition | cre A certain class of errors, including time out errors appeared at the bottom of a page, making the error difficult to notice, especially when viewing large tables. With this werk, these error messages will appear on top of the page like all other errors.

3 months, 1 week

[2.4.0] Checkmk Werk 16430 adapted: veeam_jobs: Always Monitor Result of Last Backup

by Checkmk werks level 1

Werk 16430 was adapted. The following is the new Werk, a diff is shown at the end of the message. [//]: # (werk v2) # veeam_jobs: Always Monitor Result of Last Backup key | value ---------- | --- date | 2024-06-05T14:36:09+00:00 version | 2.4.0b1 class | fix edition | cee component | checks level | 1 compatible | yes Previously, the check plugin `veeam_jobs` would not always check the result of the last backup job to determine the monitoring state. If the creation time was an empty string, it would show `item not found`. Moreover, if the last state of the plugin was `Starting`, `Working` or `Postprocessing`, then the check would be OK, even if the last backup failed. The check now shows all the information available unconditionally. Moreover, * a Success result is OK, * a Warning result is WARN, * a Failed result is CRIT, * a None result is OK or UNKNOWN. There is no change in behaviour in this case. ------------------------------------<diff>------------------------------------------- [//]: # (werk v2) # veeam_jobs: Always Monitor Result of Last Backup key | value ---------- | --- date | 2024-06-05T14:36:09+00:00 version | 2.4.0b1 class | fix edition | cee component | checks level | 1 compatible | yes Previously, the check plugin `veeam_jobs` would not always check the result of the last backup job to determine the monitoring state. If the creation time was an empty string, it would show `item not found`. Moreover, if the last state of the plugin was `Starting`, `Working` or `Postprocessing`, then the check would be OK, even if the last backup failed. The check now shows all the information available unconditionally. Moreover, + * a Success result is OK, * a Warning result is WARN, * a Failed result is CRIT, * a None result is OK or UNKNOWN. There is no change in behaviour in this case.

3 months, 1 week

[2.2.0] Checkmk Werk 16245 created: Add c6a.* as AWS EC2 resource types

by Checkmk werks level 1

Title: Add c6a.* as AWS EC2 resource types Class: feature Compatible: compat Component: checks Date: 1718117240 Edition: cre Level: 1 Version: 2.2.0p28

3 months, 1 week

[2.2.0] Checkmk Werk 14234 created: BI configuration: "Toggle search preview"

by Checkmk werks level 1

Title: BI configuration: "Toggle search preview" Class: fix Compatible: compat Component: bi Date: 1718110926 Edition: cre Level: 1 Version: 2.2.0p28 The search preview for the BI nodes only worked if the entered data was changed again.

3 months, 1 week

[2.3.0] Checkmk Werk 16987 created: Vertical graph axes: Always include zero for automatically adjusted ranges

by Checkmk werks level 1

[//]: # (werk v2) # Vertical graph axes: Always include zero for automatically adjusted ranges key | value ---------- | --- date | 2024-06-12T04:53:36+00:00 version | 2.3.0p7 class | fix edition | cre component | multisite level | 1 compatible | yes As of this werk, the vertical axes of graphs with no explicitly specified vertical range will always include zero. In case all the rendered data is non-negative, the vertical axis will start at zero. Otherwise, the vertical axis will of course start below zero.

3 months, 1 week

[2.3.0] Checkmk Werk 14234 created: BI configuration: "Toggle search preview"

by Checkmk werks level 1

[//]: # (werk v2) # BI configuration: "Toggle search preview" key | value ---------- | --- compatible | yes version | 2.3.0p7 date | 2024-06-11T13:02:06+00:00 level | 1 class | fix component | bi edition | cre The search preview for the BI nodes only worked if the entered data was changed again.

3 months, 1 week

[2.3.0] Checkmk Werk 16245 created: Add c6a.* as AWS EC2 resource types

by Checkmk werks level 1

[//]: # (werk v2) # Add c6a.* as AWS EC2 resource types key | value ---------- | --- compatible | yes version | 2.3.0p7 date | 2024-06-11T14:47:20+00:00 level | 1 class | feature component | checks edition | cre

3 months, 1 week

[2.4.0] Checkmk Werk 16767 deleted: NetApp via WebAPI: remove deprecated agent and plugin

by Checkmk werks level 1

Werk 16767 was deleted. The following Werk is no longer relevant. [//]: # (werk v2) # NetApp via WebAPI: remove deprecated agent and plugin key | value ---------- | --- date | 2024-06-07T08:39:33+00:00 version | 2.4.0b1 class | feature edition | cre component | checks level | 2 compatible | no This werk impacts users who monitor a NetApp environment with the deprecated special agent "NetApp via WebAPI" (agent_netapp). As of Checkmk version 2.4.0, the agent "NetApp via WebAPI" and its associated checks and inventory plugins have been removed. Please configure the new special agent using the "NetApp via Ontap REST API" ruleset and perform a re-discovery. The following plugins are no longer available: - NetApp Filer: Cluster-Mode CPU Utilization (_netapp_api_aggr_) - NetApp Ontap Filer: 7Mode Cluster Status (_netapp_api_cluster_) - NetApp API Connection (_netapp_api_connection_) - NetApp Filer: Cluster-Mode CPU Utilization (_netapp_api_cpu_) - NetApp Clustermode Filer: NVRAM Battery (_netapp_api_cpu_nvram_bat_) - NetApp Filer: 7Mode Global CPU Utilization (_netapp_api_cpu_utilization_) - NetApp Filer: Disk (_Summarynetapp_api_disk_summary_) - NetApp Filer Clustermode: PSU Fault Info (_netapp_api_environment_) - NetApp Filer Clustermode: System Electrical Current (_netapp_api_environment_current_) - NetApp Filer Clustermode: Fan Fault Info (_netapp_api_environment_fan_faults_) - NetApp Filer Clustermode: System Fan Speed (_netapp_api_environment_fans_) - NetApp Filer Clustermode: System Temperature (_netapp_api_environment_temperature_) - NetApp Filer Clustermode: System Electrical Voltage (_netapp_api_environment_voltage_) - NetApp Filer: FANs (_netapp_api_fan_) - NetApp Filer: FANs Summary (_netapp_api_fan_summary_) - NetApp Cluster-Mode: State of Fibrechannel Interfaces (_netapp_api_fcp_) - NetApp Filer: State of Network Interfaces (_netapp_api_if_) - NetApp Filer: Version Info (_netapp_api_info_) - NetApp Filer: Used Space of LUNs (_netapp_api_luns_) - NetApp Filer: Ports (_netapp_api_ports_) - NetApp Filer 7Mode: Protocols (_netapp_api_protocol_) - NetApp Filer: Power Supplies (_netapp_api_psu_) - NetApp Filer: Power Supplies Summary (_netapp_api_psu_summary_) - NetApp Filer: Used Space of qtrees in Volumes (_netapp_api_qtree_quota_) - NetApp Filer: Used Space in Snapshots of Volumes (_netapp_api_snapshots_) - NetApp Filer: Snapvault/Snapmirror Lag-time (_netapp_api_snapvault_) - NetApp Filer: Overall System Health (_netapp_api_status_) - NetApp Filer: Systemtime (_netapp_api_systemtime_) - NetApp Filer: Temperature Sensors (_netapp_api_temp_) - NetApp Filer 7Mode: vFiler CPU Utilization (_netapp_api_vf_stats_) - NetApp Filer: vFiler Traffic (_netapp_api_vf_stats_traffic_) - NetApp Filer: vFiler Status (_netapp_api_vf_status_) - NetApp Filer: Used Space and Traffic of Volumes (_netapp_api_volumes_) - NetApp Filer: vServer Status (_netapp_api_vs_status_) - NetApp Filer: vServer Traffic Summary (_netapp_api_vs_traffic_)

3 months, 1 week

[2.4.0] Checkmk Werk 16987 created: Vertical graph axes: Always include zero for automatically adjusted ranges

by Checkmk werks level 1

[//]: # (werk v2) # Vertical graph axes: Always include zero for automatically adjusted ranges key | value ---------- | --- date | 2024-06-12T04:53:36+00:00 version | 2.4.0b1 class | fix edition | cre component | multisite level | 1 compatible | yes As of this werk, the vertical axes of graphs with no explicitly specified vertical range will always include zero. In case all the rendered data is non-negative, the vertical axis will start at zero. Otherwise, the vertical axis will of course start below zero.

3 months, 1 week

[2.4.0] Checkmk Werk 14234 created: BI configuration: "Toggle search preview"

by Checkmk werks level 1

[//]: # (werk v2) # BI configuration: "Toggle search preview" key | value ---------- | --- compatible | yes version | 2.4.0b1 date | 2024-06-11T13:02:06+00:00 level | 1 class | fix component | bi edition | cre The search preview for the BI nodes only worked if the entered data was changed again.

3 months, 1 week

← Newer
1
...
14
15
16
17
18
19
20
...
28
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Checkmk werks level1 June 2024