Checkmk werks level1 January 2024

checkmk-werks-lvl1@lists.checkmk.com

1 participants
231 discussions

[2.3.0] Checkmk Werk 15649 created: windows_tasks: Display Correct Scheduled Task State

by Checkmk werks level 1

Title: windows_tasks: Display Correct Scheduled Task State Class: fix Compatible: compat Component: checks Date: 1705315505 Edition: cre Knowledge: doc Level: 1 Version: 2.3.0b1 Previously, the `Scheduled Task State` could be N\A, if the Action of a Windows task contained a comma. Moreover, the plugin only supported German or English localization settings for Windows. With this Werk, `windows_tasks` uses the new PowerShell API to obtain the data. This fixes the aforementioned issues. The changes in this Werk are only applicable, if the underlying Windows version supports the PowerShell API. The Windows versions supported by Checkmk 2.2.0 and later all have the required the PowerShell functionality. Windows 7 does not meet the requirements.

8 months

[2.3.0] Checkmk Werk 16349 created: Support Diagnostics: UI improvements

by Checkmk werks level 1

[//]: # (werk v2) # Support Diagnostics: UI improvements key | value ---------- | --- compatible | yes version | 2.3.0b1 date | 2024-01-17T07:36:58+00:00 level | 1 class | fix component | wato edition | cre This fix * renames "Crash Dumps" to "Crash Reports" and mark them as medium sensitive, * renames "Local Files" to "Local Files and MKPs". That's somewhat redundant, but it helps to better understand what is packed.

8 months

[2.1.0] Checkmk Werk 16349 created: Support Diagnostics: UI improvements

by Checkmk werks level 1

Title: Support Diagnostics: UI improvements Class: fix Compatible: compat Component: wato Date: 1705477018 Edition: cre Level: 1 Version: 2.1.0p39 This fix LI: renames "Crash Dumps" to "Crash Reports" and mark them as medium sensitive, LI: renames "Local Files" to "Local Files and MKPs". That's somewhat redundant, but it helps to better understand what is packed.

8 months

[2.1.0] Checkmk Werk 16088 created: Support Diagnostics: Also add the latest Crash Dumps to the SD Dump

by Checkmk werks level 1

Title: Support Diagnostics: Also add the latest Crash Dumps to the SD Dump Class: feature Compatible: compat Component: setup Date: 1695833651 Edition: cre Level: 1 Version: 2.1.0p39 For each category of crash dumps (base, check, ec, gui, rest_api, section), add the latest dump to the Support Diagnostics dump.

8 months

[2.1.0] Checkmk Werk 15650 created: mk_tsm: Fix export: =: is not an identifier

by Checkmk werks level 1

Title: mk_tsm: Fix export: =: is not an identifier Class: fix Compatible: compat Component: checks Date: 1705329209 Edition: cre Knowledge: doc Level: 1 State: unknown Version: 2.1.0p39 Since Werk 16273 `eval` is no longer used to create the required environment. In some setups, the following error occurs. ``` export: =: is not an identifier ``` With this Werk the error is fixed. The error occured, if the ouput of `get_dsmserv_processes` consisted of a single linebreak.

8 months

[2.2.0] Checkmk Werk 16013 created: Fix missing event console rules after site update

by Checkmk werks level 1

Title: Fix missing event console rules after site update Class: fix Compatible: compat Component: ec Date: 1705483102 Edition: cee Level: 1 Version: 2.2.0p19 With werk 16012 the event console rules are filtered ond saved to the location var/mkeventd/active_config during activate changes. This werk fixes the missing procedure while updating to a new Checkmk version.

8 months

[2.2.0] Checkmk Werk 16349 created: Support Diagnostics: UI improvements

by Checkmk werks level 1

Title: Support Diagnostics: UI improvements Class: fix Compatible: compat Component: wato Date: 1705477018 Edition: cre Level: 1 Version: 2.2.0p19 This fix LI: renames "Crash Dumps" to "Crash Reports" and mark them as medium sensitive, LI: renames "Local Files" to "Local Files and MKPs". That's somewhat redundant, but it helps to better understand what is packed.

8 months

[2.2.0] Checkmk Werk 16025 deleted: Update PHP version in SLES15SP3 from 7 to 8

by Checkmk werks level 1

Werk 16025 was deleted. The following Werk is no longer relevant. Title: Update PHP version in SLES15SP3 from 7 to 8 Class: fix Compatible: incomp Component: rpm Date: 1701254497 Edition: cre Level: 2 Version: 2.2.0p17 Checkmk was shipped with a dependency to PHP7 for SLES15SP3. Since PHP7 is part of the legacy module, this Werk updates the dependency from PHP7 to PHP8. As SLES only allows one version of PHP to be installed, the following steps will uninstall PHP7 from the system and install the new version of Checkmk with PHP8. Be aware that this procedure updates PHP from version 7 to 8 for the whole OS. In case you run additional PHP applications next to Checkmk, the update will also affect them. Run the following commands to perform the update to the new Checkmk version: * add SLES-15SP4 repo to get PHP8 with <tt>zypper addrepo https://updates.suse.com/SUSE/Products/SLE-BCI/15-SP4/x86_64/product/ sles15sp4</tt> * install the new Checkmk version with <tt>zypper install NEW_CHECKMK.rpm</tt> * Zypper will now complain about a conflict with several PHP packages and asks you to select a solution. There, select <tt>solution 1</tt> to confirm the deinstallation of the current Checkmk version, the PHP7 modules and to continue with the installation * confirm the installation of the new Checkmk version and PHP8 with <tt>yes</tt> * removing the existing Checkmk version will throw an error like `Site <SITENAME> is still using this version! Removal of <OLD_CHECKMK>(@System) failed:`, proceed by choosing <tt>ignore</tt> which creates a inconsistent state for the old Checkmk version package, which we will resolve in a later step. * PHP7 will be removed and PHP8 gets installed * change to the site user with <tt>omd su SITE_NAME</tt> * stop the site with <tt>omd stop</tt> * perform the update to the new Checkmk version with <tt>omd update</tt>, select <tt>Update</tt> at the user prompt * in case further prompts regarding wrong permissions of BUILD files appear, choose the default value with <tt>d</tt> * start the site again with <tt>omd start</tt> * exit from the site user * list all installed Checkmk version with <tt>omd versions</tt> * finally remove the old Checkmk installation with <tt>zypper remove OLD_CHECKMK</tt>

8 months

[2.2.0] Checkmk Werk 16025 adapted: Update PHP version in SLES15SP3 from 7 to 8

by Checkmk werks level 1

Werk 16025 was adapted. The following is the new Werk, a diff is shown at the end of the message. Title: Update PHP version in SLES15SP3 from 7 to 8 Class: fix Compatible: incomp Component: rpm Date: 1701254497 Edition: cre Level: 2 Version: 2.2.0p17 Checkmk was shipped with a dependency to PHP7 for SLES15SP3. Since PHP7 is part of the legacy module, this Werk updates the dependency from PHP7 to PHP8. As SLES only allows one version of PHP to be installed, the following steps will uninstall PHP7 from the system and install the new version of Checkmk with PHP8. Be aware that this procedure updates PHP from version 7 to 8 for the whole OS. In case you run additional PHP applications next to Checkmk, the update will also affect them. Run the following commands to perform the update to the new Checkmk version: * add SLES-15SP4 repo to get PHP8 with <tt>zypper addrepo https://updates.suse.com/SUSE/Products/SLE-BCI/15-SP4/x86_64/product/ sles15sp4</tt> * install the new Checkmk version with <tt>zypper install NEW_CHECKMK.rpm</tt> * Zypper will now complain about a conflict with several PHP packages and asks you to select a solution. There, select <tt>solution 1</tt> to confirm the deinstallation of the current Checkmk version, the PHP7 modules and to continue with the installation * confirm the installation of the new Checkmk version and PHP8 with <tt>yes</tt> * removing the existing Checkmk version will throw an error like `Site <SITENAME> is still using this version! Removal of <OLD_CHECKMK>(@System) failed:`, proceed by choosing <tt>ignore</tt> which creates a inconsistent state for the old Checkmk version package, which we will resolve in a later step. * PHP7 will be removed and PHP8 gets installed * change to the site user with <tt>omd su SITE_NAME</tt> * stop the site with <tt>omd stop</tt> * perform the update to the new Checkmk version with <tt>omd update</tt>, select <tt>Update</tt> at the user prompt * in case further prompts regarding wrong permissions of BUILD files appear, choose the default value with <tt>d</tt> * start the site again with <tt>omd start</tt> * exit from the site user * list all installed Checkmk version with <tt>omd versions</tt> * finally remove the old Checkmk installation with <tt>zypper remove OLD_CHECKMK</tt> ------------------------------------<diff>------------------------------------------- Title: Update PHP version in SLES15SP3 from 7 to 8 Class: fix Compatible: incomp Component: rpm Date: 1701254497 Edition: cre Level: 2 - Version: 2.2.0p19 ? ^ + Version: 2.2.0p17 ? ^ Checkmk was shipped with a dependency to PHP7 for SLES15SP3. Since PHP7 is part of the legacy module, this Werk updates the dependency from PHP7 to PHP8. As SLES only allows one version of PHP to be installed, the following steps will uninstall PHP7 from the system and install the new version of Checkmk with PHP8. Be aware that this procedure updates PHP from version 7 to 8 for the whole OS. In case you run additional PHP applications next to Checkmk, the update will also affect them. Run the following commands to perform the update to the new Checkmk version: * add SLES-15SP4 repo to get PHP8 with <tt>zypper addrepo https://updates.suse.com/SUSE/Products/SLE-BCI/15-SP4/x86_64/product/ sles15sp4</tt> * install the new Checkmk version with <tt>zypper install NEW_CHECKMK.rpm</tt> * Zypper will now complain about a conflict with several PHP packages and asks you to select a solution. There, select <tt>solution 1</tt> to confirm the deinstallation of the current Checkmk version, the PHP7 modules and to continue with the installation * confirm the installation of the new Checkmk version and PHP8 with <tt>yes</tt> * removing the existing Checkmk version will throw an error like `Site <SITENAME> is still using this version! Removal of <OLD_CHECKMK>(@System) failed:`, proceed by choosing <tt>ignore</tt> which creates a inconsistent state for the old Checkmk version package, which we will resolve in a later step. * PHP7 will be removed and PHP8 gets installed * change to the site user with <tt>omd su SITE_NAME</tt> * stop the site with <tt>omd stop</tt> * perform the update to the new Checkmk version with <tt>omd update</tt>, select <tt>Update</tt> at the user prompt * in case further prompts regarding wrong permissions of BUILD files appear, choose the default value with <tt>d</tt> * start the site again with <tt>omd start</tt> * exit from the site user * list all installed Checkmk version with <tt>omd versions</tt> * finally remove the old Checkmk installation with <tt>zypper remove OLD_CHECKMK</tt>

8 months

[2.2.0] Checkmk Werk 14859 created: Event Console: Fix The EC always activates the config written by the previous activation.

by Checkmk werks level 1

Title: Event Console: Fix The EC always activates the config written by the previous activation. Class: fix Compatible: compat Component: ec Date: 1705414424 Edition: cre Level: 2 Version: 2.2.0p19 The bug was introduced by the werk: [#16012](https://checkmk.com/werk/16012) in version 2.2.0p18. A workaround would be: make a trivial change to the rules/rule packs (edit description) and activate the changes. Or reload the EC manually after the initial reload to apply the correct config.

8 months

← Newer
1
...
12
13
14
15
16
17
18
...
24
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Checkmk werks level1 January 2024