Checkmk werks level1 September 2015

checkmk-werks-lvl1@lists.checkmk.com

6 participants
94 discussions

Check_MK Werk 2625: kernel.util and winperf_processor.util checks now support an optional graph showing utilization of individual cores

by Sebastian Herbord

ID: 2625 Title: kernel.util and winperf_processor.util checks now support an optional graph showing utilization of individual cores Component: Checks & Agents Level: 1 Class: New Feature Version: 1.2.7i3 The CPU utilization checks for unix and windows can now be configured through wato rules to produce an additional graph which shows one line per cpu core.

8 years, 11 months

Check_MK Werk 2596: Fix exception in availabiliy table if average number of events and summary are both being displayed

by Mathias Kettner

ID: 2596 Title: Fix exception in availabiliy table if average number of events and summary are both being displayed Component: Reporting & Availability Level: 2 Class: Bug Fix Version: 1.2.7i3 The exception was about <tt>group_availability</tt> not being defined. This has been fixed.

8 years, 11 months

Check_MK Werk 2592: new checks: netextreme_{fan/psu/psu_in/psu_out/temp} for Extreme Networks Switches

by Simon Betz

ID: 2592 Title: new checks: netextreme_{fan/psu/psu_in/psu_out/temp} for Extreme Networks Switches Component: Checks & Agents Level: 1 Class: New Feature Version: 1.2.7i3 These checks monitor the fan state and speed in RMP, the system temperature in Celsius and system power in Watt, the power in Watt and voltage in Volt of input power supplies and the current in Ampere and voltage in Volt of output power supplies of a Extreme Networks Switch which supports the EXTREME-MIB.

8 years, 11 months

Check_MK Werk 2606: cisco_temperature: Reduced SNMP overhead for large devices

by Lars Michelsen

ID: 2606 Title: cisco_temperature: Reduced SNMP overhead for large devices Component: Checks & Agents Level: 1 Class: Bug Fix Version: 1.2.7i3 The cisco_temperature check makes use of the SNMP table .1.3.6.1.2.1.47.1.1.1.1.2 to gather the description of the sensors. This table can be very large on some devices. Check_MK normally needs to fetch the whole table because of it's architecture e.g. to make the service discovery possible. But since this table is normally static, it is not needed to fetch this large table during every check. Check_MK is now caching this table during checking. The cache is renewed when performing service discovery (either manually or automatically via the discovery service).

8 years, 11 months

Check_MK Werk 2624: fixed vbscript based inventory script (windows) only sending updated data every 39 years

by Sebastian Herbord

ID: 2624 Title: fixed vbscript based inventory script (windows) only sending updated data every 39 years Component: HW/SW-Inventory Level: 1 Class: Bug Fix Version: 1.2.7i3

8 years, 11 months

Check_MK Werk 2591: new check raritan_emx_sensors: monitors contact, temperature, humidity, air flow and pressure sensors connected to a Raritan EMX Device

by Simon Betz

ID: 2591 Title: new check raritan_emx_sensors: monitors contact, temperature, humidity, air flow and pressure sensors connected to a Raritan EMX Device Component: Checks & Agents Level: 1 Class: New Feature Version: 1.2.7i3

8 years, 11 months

Check_MK Werk 2590: new check raritan_px2_sensors: monitors the temperature, humidity, air flow and pressure sensors connected to a Raritan PX2 Device

by Simon Betz

ID: 2590 Title: new check raritan_px2_sensors: monitors the temperature, humidity, air flow and pressure sensors connected to a Raritan PX2 Device Component: Checks & Agents Level: 1 Class: New Feature Version: 1.2.7i3

8 years, 11 months

Check_MK Werk 2589: check raritan_emx: splitted into three subchecks

by Simon Betz

ID: 2589 Title: check raritan_emx: splitted into three subchecks Component: Checks & Agents Level: 1 Class: New Feature Version: 1.2.7i3 Now the raritan_emx check has three subchecks: raritan_emx monitors the temperature, raritan_emx.fan monitors the fan state and speed and raritan_emx.binary reports the state of the door contact of the rack units of a Raritan EMX Device.

8 years, 11 months

Check_MK Werk 2623: janitza_umg_inphase, janitza_umg_freq, janitza_umg_temp: new checks for Janitza Power Analyzers

by Sebastian Herbord

ID: 2623 Title: janitza_umg_inphase, janitza_umg_freq, janitza_umg_temp: new checks for Janitza Power Analyzers Component: Checks & Agents Level: 1 Class: New Feature Version: 1.2.7i3

8 years, 11 months

Check_MK Werk 2595: Discovery check can now automatically add missing services and also activate changes

by Mathias Kettner

ID: 2595 Title: Discovery check can now automatically add missing services and also activate changes Component: Core & Setup Level: 2 Class: New Feature Version: 1.2.7i3 You can now have the Check_MK Discovery check automatically repair things by adding missing services or even removing vanished services. This is activated by using the new rule set Periodic Discovery Check instead of the previous (now deprecated) global option Enable regular service discovery checks. In the new rule set you can activate and configure this feature on a per-host base. Also the discovery check can now warn about vanished services. The default is that vanished services will not set the state to WARN, however, and just display them. So unless you change the configuration the behaviour of the discovery check has not changed. Note: Automatically removing vanished services can be dangerous as broken things like missing file systems or even switch ports that went down will be removed from the monitoring! Only use in special situations where this is no problem.

8 years, 11 months

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Checkmk werks level1 September 2015