Module: check_mk
Branch: master
Commit: 25edb9f3c8a0faaf17eaa8f63d5390e4ec407b07
URL:
http://git.mathias-kettner.de/git/?p=check_mk.git;a=commit;h=25edb9f3c8a0fa…
Author: Bernd Stroessenreuther <bs(a)mathias-kettner.de>
Date: Fri Jul 19 16:37:40 2013 +0200
initial version of check manpage for blade_bx_powermod and blade_bx_temp
---
checkman/blade_bx_powermod | 16 ++++++++++++++--
checkman/blade_bx_temp | 32 ++++++++++++++++++++++++++++++--
2 files changed, 44 insertions(+), 4 deletions(-)
diff --git a/checkman/blade_bx_powermod b/checkman/blade_bx_powermod
index abe9394..326e873 100644
--- a/checkman/blade_bx_powermod
+++ b/checkman/blade_bx_powermod
@@ -1,7 +1,19 @@
title: Primergy BX600 Blade Server: Power module
+agents: snmp
catalog: hw/server/fujitsu
license: GPL
distribution: check_mk
description:
- TODO: BERND
- title correct
+ TODO: BERND, FIXME: Blade Server or Blade Enclosure?
+
+ Checks the state of power modules in Primergy BX600 Blade Servers
+
+ Returns {OK} if the power module reports ok status and {CRIT} on any
+ other status.
+
+item:
+ The index of the power module as returned by SNMP.
+
+inventory:
+ Creates one check per power module.
+
diff --git a/checkman/blade_bx_temp b/checkman/blade_bx_temp
index 229ca62..97df583 100644
--- a/checkman/blade_bx_temp
+++ b/checkman/blade_bx_temp
@@ -1,7 +1,35 @@
title: Primergy BX600 Blade Server: Temperature
+agents: snmp
catalog: hw/server/fujitsu
license: GPL
distribution: check_mk
description:
- TODO: BERND
- title correct?
+ TODO: BERND, FIXME: in Blade Servers or Blade Enclosures?
+
+ Checks temperature sensors in Primergy BX600 Blade Servers.
+
+ Returns {CRIT} if the sensor is not present or powered off or if the sensor
+ reports a non ok state or if the reported temperature is higher or equal {level_crit}
+
+ Returns {WARN} if the reported temperature is higher or equal {level_warn}
+
+ {OK} is returned otherwise.
+
+item:
+ The index of the temperature sensor as returned by SNMP
+
+perfdata:
+ One value: The temperature in °C
+
+inventory:
+ Creates one check per power module.
+
+[parameters]
+level_warn(int): If you want to set a warning level manually give a number here.
+ Unit is °C. Or leave empty to use the default warning level from the device
+ (reported by SNMP).
+
+level_crit(int): If you want to set a critical level manually give a number here.
+ Unit is °C. Or leave empty to use the default critical level from the device
+ (reported by SNMP).
+