Module: check_mk
Branch: master
Commit: 3a83b97d10989ea830771a254f9eebe7327d54fe
URL:
http://git.mathias-kettner.de/git/?p=check_mk.git;a=commit;h=3a83b97d10989e…
Author: Konstantin Büttner <kb(a)mathias-kettner.de>
Date: Tue May 12 11:28:45 2015 +0200
Added manpages for icom_repeater checks
---
checkman/icom_repeater | 11 +++++++++++
checkman/icom_repeater.pll_volt | 24 +++++++++++++++++++++++
checkman/icom_repeater.temp | 40 +++++++++++++++++++++++++++++++++++++++
3 files changed, 75 insertions(+)
diff --git a/checkman/icom_repeater b/checkman/icom_repeater
new file mode 100644
index 0000000..a54ba2b
--- /dev/null
+++ b/checkman/icom_repeater
@@ -0,0 +1,11 @@
+title: ICOM Repeater: Operation Status
+agents: snmp
+catalog: hw/other
+license: GPL
+distribution: check_mk
+description:
+ This check monitors the operation status of ICOM repeaters. It
+ interprets off as CRIT, on as OK and all other states as UNKNOWN.
+
+inventory:
+ One check per device is created.
diff --git a/checkman/icom_repeater.pll_volt b/checkman/icom_repeater.pll_volt
new file mode 100644
index 0000000..dc9f556
--- /dev/null
+++ b/checkman/icom_repeater.pll_volt
@@ -0,0 +1,24 @@
+title: ICOM Repeater: PLL Lock Voltage
+agents: snmp
+catalog: hw/other
+license: GPL
+distribution: check_mk
+description:
+ This check monitors the RX and TX PLL lock voltage
+
+item:
+ "RX" or "TX"
+
+perfdata:
+ One value: The current voltage
+
+inventory:
+ One check per PLL is created.
+
+[parameters]
+ parameters(dict): This checks parameters are a dictionary with the
+ (optional) keys {"rx"} and {"tx"}, under each of which lies a list
of
+ tuples (frequency, (warn_lower, crit_lower, warn, crit)), where frequency is
+ the upper boundary of the frequency range for which the parameters
+ (warn_lower, crit_lower, warn, crit)
+
diff --git a/checkman/icom_repeater.temp b/checkman/icom_repeater.temp
new file mode 100644
index 0000000..3f4f34f
--- /dev/null
+++ b/checkman/icom_repeater.temp
@@ -0,0 +1,40 @@
+title: ICOM Repeater: Temperature
+agents: snmp
+catalog: hw/other
+license: GPL
+distribution: check_mk
+description:
+ This check monitors the system temperature of ICOM repeaters.
+
+item:
+ Always "System"
+
+perfdata:
+ One value: The current temperature.
+
+inventory:
+ One check per device is created.
+
+[parameters]
+parameters(dict): This checks parameters are a dictionary with the
+following (optional) keys:
+
+ {"levels"}: A tuple (warn, crit) containing the upper levels. Default: (50,
55)
+
+ {"levels_lower"}: A tuple (warn, crit) containing the lower levels. Default:
(-20, -25)
+
+ {"output_unit"}: "c", "f" or "k", the check
will output the temperature in the
+ specified unit. If this is not set, output is in degrees Celsius.
+
+ {"input_unit"}: "c, "f" or "k". By default, the
check interprets the sensor value
+ according to the unit sent by the device. This key allows to override that. Tread
+ lightly, as this may lead to a misinterpreted temperature. Should only be used if
+ the device reports its unit incorrectly.
+
+ {"device_levels_handling"}: Specifies how the temperature status
+ (too hot/too cold) provided by the device, respectively the device's levels are
+ handled compared to levels set by the user. Options are "usr",
"dev",
+ "best", "worst", "devdefault", "usrdefault".
"usr" and "dev" means respecting
+ only the user's resp. the device's levels, wheras "usrdefault" and
"devdefault"
+ take the user's resp. the device's levels if present, otherwise try to use the
+ device's resp. the user's levels.