Module: check_mk
Branch: master
Commit: 47b473767f2a20657cad14d08d857e11dd82f581
URL:
http://git.mathias-kettner.de/git/?p=check_mk.git;a=commit;h=47b473767f2a20…
Author: Lars Michelsen <lm(a)mathias-kettner.de>
Date: Fri May 6 14:39:11 2016 +0200
Removed manpages for missing (mostly renamed) checks
---
checkman/avaya_88xx_fan | 14 --------------
checkman/dell_poweredge_amperage.current | 31 ------------------------------
checkman/masterguard_out_voltage | 26 -------------------------
checkman/mbg_lantime_mbg_fan | 17 ----------------
checkman/netapp_api_vf_stats.cpu_util | 25 ------------------------
checkman/rsa_health | 11 -----------
checks/dell_poweredge_amperage | 9 ---------
7 files changed, 133 deletions(-)
diff --git a/checkman/avaya_88xx_fan b/checkman/avaya_88xx_fan
deleted file mode 100644
index ae63bcd..0000000
--- a/checkman/avaya_88xx_fan
+++ /dev/null
@@ -1,14 +0,0 @@
-title: Avaya 88xx Chassis Fans
-agents: snmp
-catalog: hw/network/avaya
-license: GPL
-distribution: check_mk
-description:
- This check monitors the fan status of Avaya 88xx devices.
- Depending on the reported state it can go OK, UNKNOWN or DOWN.
-
-item:
- The index of the chassis fan.
-
-inventory:
- Creates one service for each chassis fan.
diff --git a/checkman/dell_poweredge_amperage.current
b/checkman/dell_poweredge_amperage.current
deleted file mode 100644
index 4672edb..0000000
--- a/checkman/dell_poweredge_amperage.current
+++ /dev/null
@@ -1,31 +0,0 @@
-title: Dell PowerEdge Server: Current
-agents: snmp
-catalog: hw/server/dell
-license: GPL
-distribution: check_mk
-description:
- This check monitors the electrical current going through power units of
- Dell PowerEdge Servers.
-
- No limits are set in the check, since limits are configured in the device
- itself. The state given by the device is taken as the state of the check
- as follows: If the device returns {OK}, the check is {OK}. If the device returns
- {other}, {unknown}, {nonCriticalUpper} and {nonCriticalLower} a state of {WARN}
- is returned. Otherwise the check is {CRIT}.
-
- The check displays the upper warning and critical limits as configured in the device.
- Further limits are {not} displayed, even though they may be configured. These are
- UpperNonRecoverable, LowerCritical, LowerNonCritical and LowerNonRecoverable.
- These limits yet may lead to state changes, the corresponding states are honoured
- as outlined above.
-
-item:
- The name of the location variable configured for the power unit
-
-perfdata:
- One variable: the electrical current in Ampere
-
-inventory:
- All power units
-
-
diff --git a/checkman/masterguard_out_voltage b/checkman/masterguard_out_voltage
deleted file mode 100644
index 997d582..0000000
--- a/checkman/masterguard_out_voltage
+++ /dev/null
@@ -1,26 +0,0 @@
-title: Masterguard UPS Devices: Out voltage
-agents: snmp
-catalog: hw/power/emerson
-license: GPL
-distribution: check_mk
-description:
- Checks the Out Voltage of Masterguard UPS Devices
-
-item:
- ID of the phase
-
-perfdata:
- One value: The current Voltage
-
-inventory:
- One service per phase will be created
-
-[parameters]
-parameters (tuple): A pair of numbers for warning and critical level
-
- warning (int): The lower limit which triggers an WARNING state
-
- critical (int): The lower limit which triggers an CRITICAL state
-
-[configuration]
-masterguard_out_voltage_default_levels (tuple): Default warning and critical level
diff --git a/checkman/mbg_lantime_mbg_fan b/checkman/mbg_lantime_mbg_fan
deleted file mode 100644
index b1aa62f..0000000
--- a/checkman/mbg_lantime_mbg_fan
+++ /dev/null
@@ -1,17 +0,0 @@
-title: Meinberg LANTIME devices: Fans (NG MIB)
-agents: snmp
-catalog: hw/time/meinberg
-license: GPL
-distribution: check_mk
-description:
- This check monitors the state of fans of Meinberg LANTIME clocks supporting the
- new MBG-LANTIME-NG-MIB.
-
- The state of the service is CRIT when the status extracted from the device is
"off" or
- when errors have been detected.
-
-inventory:
- One check per fan is created.
-
-item:
- The ID of the fan
diff --git a/checkman/netapp_api_vf_stats.cpu_util
b/checkman/netapp_api_vf_stats.cpu_util
deleted file mode 100644
index b4fe170..0000000
--- a/checkman/netapp_api_vf_stats.cpu_util
+++ /dev/null
@@ -1,25 +0,0 @@
-title: NetApp Filers: vFiler CPU Utilization
-agents: netapp
-catalog: hw/storagehw/netapp
-license: GPL
-distribution: check_mk
-description:
- Checks the CPU utilization (in percent) of a vFiler.
-
- {WARN} or {CRIT} is returned, if the usage in the last 60 sec was above
- given thresholds. {OK} is returned otherwise.
-
-perfdata:
- One value: The vFilers CPU utilization in percent.
-
-inventory:
- Creates one check for each vFiler.
-
-examples:
- # set default levels to 70 and 80 percent:
- netapp_api_vf_stats_cpu_util_default_levels = { "levels": (70.0, 80.0) }
-
-[parameters]
-parameters (dict): with the element
-{"levels"}: (float, float): levels of vFiler CPU utilization for {WARN} and
{CRIT} in percent
-
diff --git a/checkman/rsa_health b/checkman/rsa_health
deleted file mode 100644
index 04013d5..0000000
--- a/checkman/rsa_health
+++ /dev/null
@@ -1,11 +0,0 @@
-title: System health via IBM Remote Supervisor Adapter (RSA)
-agents: snmp
-catalog: hw/server/ibm
-license: GPL
-distribution: check_mk
-description:
- This check monitors the overall system health of a server
- via a IBM Remote Supervisor Adapter (RSA).
-
-inventory:
- The inventory will find one check per RSA board.
diff --git a/checks/dell_poweredge_amperage b/checks/dell_poweredge_amperage
index 2f55c71..7dcefe6 100644
--- a/checks/dell_poweredge_amperage
+++ b/checks/dell_poweredge_amperage
@@ -104,12 +104,3 @@ check_info["dell_poweredge_amperage.power"] = {
]),
"snmp_scan_function" : lambda oid: oid('.1.3.6.1.2.1.1.2.0') ==
".1.3.6.1.4.1.674.10892.5",
}
-
-#check_info["dell_poweredge_amperage.current"] = {
-# "check_function" : check_dell_poweredge_amperage,
-# "inventory_function" : inventory_dell_poweredge_amperage_current,
-# "service_description" : "%s",
-# "has_perfdata" : True,
-# "snmp_info" : dell_poweredge_amperage_info,
-# "snmp_scan_function" : dell_poweredge_amperage_scan,
-#}