[checkmk-commits] Check_MK Git: check_mk: #1523 lnx_thermal: Now supports setting levels

Module: check_mk Branch: master Commit: c50d2f849df4ee85d41f8de554e6124d3f05a068 URL: http://git.mathias-kettner.de/git/?p=check_mk.git;a=commit;h=c50d2f849df4ee… Author: Konstantin Büttner <kb(a)mathias-kettner.de> Date: Mon Jan 19 17:53:40 2015 +0100 #1523 lnx_thermal: Now supports setting levels lnx_thermal can now be configured via the Temperature WATO Rule. Default behaviour uses trip points if present, otherwise user defined levels. Due to a changed item name, re-inventory is required. --- .werks/1523 | 11 +++++++++++ ChangeLog | 2 ++ checkman/lnx_thermal | 38 +++++++++++++++++++++++++------------- 3 files changed, 38 insertions(+), 13 deletions(-) diff --git a/.werks/1523 b/.werks/1523 new file mode 100644 index 0000000..576a76a --- /dev/null +++ b/.werks/1523 @@ -0,0 +1,11 @@ +Title: lnx_thermal: Now supports setting levels +Level: 1 +Component: checks +Compatible: incomp +Version: 1.2.7i1 +Date: 1421686301 +Class: feature + +lnx_thermal can now be configured via the Temperature WATO Rule. +Default behaviour uses trip points if present, otherwise user defined levels. +Due to a changed item name, re-inventory is required. diff --git a/ChangeLog b/ChangeLog index 0cf7f34..7284b35 100644 --- a/ChangeLog +++ b/ChangeLog @@ -40,6 +40,8 @@ * 1849 netscaler_dnsrates: new check for DNS statistics of Citrix Netscaler Loadbalancers * 1850 netscaler_health.fan, netscaler_health.psus, netscaler_health.temp: new checks to monitor the health of Citrix Netscaler Loadbalancers * 1214 ups_bat_temp,ups_capacity,ups_in_freq,ups_in_voltage,ups_out_load,ups_out_voltage: Checks now detect more UPS Devices... + * 1523 lnx_thermal: Now supports setting levels... + NOTE: Please refer to the migration notes! * 1457 FIX: logins: new check renamed from "users" check... NOTE: Please refer to the migration notes! * 1762 FIX: lnx_thermal: Now ignoring trip points with level 0... diff --git a/checkman/lnx_thermal b/checkman/lnx_thermal index 0418214..390f013 100644 --- a/checkman/lnx_thermal +++ b/checkman/lnx_thermal @@ -4,25 +4,37 @@ catalog: os/hardware license: GPL distribution: check_mk description: - This check uses the temperature information provided by the kernel in + This check monitors the temperature provided by the kernel in /sys/class/thermal/thermal_zone* and reports values in °C - The measured value is matched against levels delivered by the kernel. - Returns {CRIT} if the kernel reports {hot} or {critical} state, - {WARN} on any other non ok state and {OK} if the temperature is - considered to be within normal operation temperature levels. - item: - The ID of the thermal zone - -examples: - # adding a check for /sys/class/thermal/thermal_zone0 - checks += [ - ( "localhost", "lnx_thermal", "0", None ) - ] + "Zone "+(The ID of the thermal zone) perfdata: One value: The current temperature in °C inventory: Creates one check for earch thermal zone. + +[parameters] +This checks parameters are a dictionary with the +following (optional) keys: + + {"levels"}: A tuple (warn, crit) containing the upper levels. Default: (70, 80) + + {"levels_lower"}: A tuple (warn, crit) containing the lower levels. No defaults. + + {"output_unit"}: "c", "f" or "k", the check will output the temperature in the +specified unit. If this is not set, output is in degrees Celsius. + + {"input_unit"}: "c, "f" or "k". By default, the check interprets the sensor value +according to the unit sent by the device. This key allows to override that. Tread +lightly, as this may lead to a misinterpreted temperature. Should only be used if +the device reports its unit incorrectly. + + {"device_levels_handling"]: How the check treats the device's internal levels +versus the ones you specify yourself. The following options are supported: "best" +results in the best status between yours and the device's levels, "worst" in the +worst, "usr" ignore's the device's levels, "dev" ignores yours, usrdefault and +devdefault uses your/the devices set of levels if present, otherwise the other +respectively. Default setting is "devdefault"