[checkmk-commits] Check_MK Git: check_mk: initial release of check manpages for emc_storage

Module: check_mk Branch: master Commit: 5abf1bede894e1c06fec85270e23c59ebe682acb URL: http://git.mathias-kettner.de/git/?p=check_mk.git;a=commit;h=5abf1bede894e1… Author: Bernd Stroessenreuther &lt;bs(a)mathias-kettner.de&gt; Date: Wed Jul 31 15:06:16 2013 +0200 initial release of check manpages for emc_storage --- checkman/emc_storage.disks | 35 +++++++++++++++++++++++ checkman/emc_storage.hba | 28 +++++++++++++++++++ checkman/emc_storage.hw_status | 49 +++++++++++++++++++++++++++++++++ checkman/emc_storage.lun_usage | 30 ++++++++++++++++++++ checkman/emc_storage.raidgroup_status | 28 +++++++++++++++++++ checkman/emc_storage.sp_status | 26 +++++++++++++++++ 6 files changed, 196 insertions(+) diff --git a/checkman/emc_storage.disks b/checkman/emc_storage.disks new file mode 100644 index 0000000..8e3041d --- /dev/null +++ b/checkman/emc_storage.disks @@ -0,0 +1,35 @@ +title: EMC Storage: Status and I/O of Disks +agents: emc +catalog: hw/storage +license: GPL +distribution: check_mk +description: + Reports the status and the I/O rate of a disk in an EMC storage system. + + Returns {OK} if the number of Hard Read Errors is 0 and the number + of Hard Write Errors is 0. {CRIT} is returned otherwise. + + Hint for implementation: Look for "Hard Read Errors:" and "Hard Write Errors:" + lines in section "Bus x Enclosure y Disk z" lines found under + "All Disks Information" + + I/O rates (in Bytes/sec) are just informational and do not trigger any state + other than {OK} + + Hint for implementation: Look for "Kbytes Read:" and "Kbytes Written:" + lines in section "Bus x Enclosure y Disk z" lines found under + "All Disks Information". Remember values of last check and devide by the + time since last check. + +item: + Consists of bus ID, enclosure ID and disk ID as returned by the agent. + E. g. "Bus 0 Enclosure 0 Disk 0" + + Hint for implementation: Look for "Bus x Enclosure y Disk z" lines in section + "All Disks Information" + +perfdata: + Two values: Read-I/O and Write-I/O in Bytes/sec + +inventory: + Automatically configures one check for every disk listed in the agent output. diff --git a/checkman/emc_storage.hba b/checkman/emc_storage.hba new file mode 100644 index 0000000..58bd975 --- /dev/null +++ b/checkman/emc_storage.hba @@ -0,0 +1,28 @@ +title: EMC Storage: iSCSI traffic on HBAs +agents: emc +catalog: hw/storage +license: GPL +distribution: check_mk +description: + Reports the traffic on iSCSI HBAs in an EMC storage system. + + The values for Blocks Read/sec and Blocks Written/sec are just informational. + The check always returns {OK} + + Hint for implementation: Look for "Blocks Read:" and "Blocks Written:" + lines in section "SP Name: <my Name>" and "SP Port ID: <my ID>" lines found under + "Information about each SPPORT:". Remember values of last check and devide by the + time since last check. + +item: + Consists of the SP Name and the SP Port ID as returned by the agent. + E. g. "SP A Port 0" + + Hint for implementation: Look for "SP Name:" and "SP Port ID:" lines in section + "Information about each SPPORT:" + +perfdata: + Two values: Blocks Read/sec and Blocks Written/sec + +inventory: + Automatically configures one check for every HBA listed in the agent output. diff --git a/checkman/emc_storage.hw_status b/checkman/emc_storage.hw_status new file mode 100644 index 0000000..2305b02 --- /dev/null +++ b/checkman/emc_storage.hw_status @@ -0,0 +1,49 @@ +title: EMC Storage: Hardware Status +agents: emc +catalog: hw/storage +license: GPL +distribution: check_mk +description: + Reports the status of Power Supplies, SPS, SPS Cabeling, LCC, CPU Modules, + SP I/O Modules and DIMM Modules on EMC storage systems. + + Returns {OK} if the agent reports "Present" or "Valid" status and {CRIT} + on every other status. + + Hint for implementation: Look for lines matching + Bus x Enclosure y Power z State: + Bus x Enclosure y SPS z State: + Bus x Enclosure y SPS z Cabling State: + Bus x Enclosure y CPU Module z State: + Bus x Enclosure y SP z I/O Module w State: + Bus x Enclosure y DIMM Module z State: + Bus x Enclosure y LCC z State: + in section "Array Information" + +item: + The name of the storage processor as returned by the special agent. + E. g. + Bus 0 Enclosure 0 Power A + Bus 0 Enclosure 0 Power B + Bus 0 Enclosure 0 SPS A + Bus 0 Enclosure 0 SPS B + Bus 0 Enclosure 0 SPS A Cabling + Bus 0 Enclosure 0 SPS B Cabling + Bus 0 Enclosure 0 CPU Module A + Bus 0 Enclosure 0 CPU Module B + Bus 0 Enclosure 0 SP A I/O Module 0 + Bus 0 Enclosure 0 SP A I/O Module 1 + Bus 0 Enclosure 0 SP B I/O Module 0 + Bus 0 Enclosure 0 SP B I/O Module 1 + Bus 0 Enclosure 0 DIMM Module A + Bus 0 Enclosure 0 DIMM Module B + Bus 0 Enclosure 1 LCC A + + Hint for implementation: see description + +perfdata: + None + +inventory: + Automatically configures one check for every hardware status entry listed + in the agent output. diff --git a/checkman/emc_storage.lun_usage b/checkman/emc_storage.lun_usage new file mode 100644 index 0000000..215a55f --- /dev/null +++ b/checkman/emc_storage.lun_usage @@ -0,0 +1,30 @@ +title: EMC Storage: Usage of LUNs +agents: emc +catalog: hw/storage +license: GPL +distribution: check_mk +description: + Reports the usage of LUNs on EMC storage systems. + + You can set levels for minimum free space to result in {WARN} and {CRIT} + state. The levels can be given in absolute megabytes or percent of the + total space available in the LUN. + + Hint for implementation: Look for "LUN Capacity(Megabytes):" line in + section "LOGICAL UNIT NUMBER <my ID>" under "All logical Units Information" + But: Where can we get actual used space in the LUN from? To be defined! + +item: + The ID of the LUN as returned by the special agent. + E. g. "18" + + Hint for implementation: Look for "LOGICAL UNIT NUMBER" + lines in section "All logical Units Information" + +perfdata: + One value: The used capacity in bytes, together with it's warn and crit + levels as well as the maximum (also in bytes) + +inventory: + Automatically configures one check for every LUN listed + in the agent output. diff --git a/checkman/emc_storage.raidgroup_status b/checkman/emc_storage.raidgroup_status new file mode 100644 index 0000000..a4595a1 --- /dev/null +++ b/checkman/emc_storage.raidgroup_status @@ -0,0 +1,28 @@ +title: EMC Storage: Status of RAID groups +agents: emc +catalog: hw/storage +license: GPL +distribution: check_mk +description: + Reports the status of RAID groups in EMC storage systems. + + Returns {OK} if ... and {CRIT} on ... + (to be defined) + + Hint for implementation: Look for "RaidGroup State:" line and following + in section "RaidGroup ID: <my ID>" under "All RAID Groups Information" + Which states are good states and which are bad states is to be defined + +item: + The RAID group ID as returned by the special agent. + E. g. "4" + + Hint for implementation: Look for "RaidGroup ID:" line in section + "All RAID Groups Information" + +perfdata: + None + +inventory: + Automatically configures one check for every RAID group listed + in the agent output. diff --git a/checkman/emc_storage.sp_status b/checkman/emc_storage.sp_status new file mode 100644 index 0000000..eeee52b --- /dev/null +++ b/checkman/emc_storage.sp_status @@ -0,0 +1,26 @@ +title: EMC Storage: Status of StorageProcessors (sp) +agents: emc +catalog: hw/storage +license: GPL +distribution: check_mk +description: + Reports the status of StorageProcessors (sp) on EMC storage systems. + + Returns {OK} if the agent reports "Present" status and {CRIT} on every other + status. + + Hint for implementation: Look for "SP * State:" line in section + "Array Information", Present -> OK, everything else -> CRIT + +item: + The name of the storage processor as returned by the special agent. + E. g. "A" + + Hint for implementation: see at description + +perfdata: + None + +inventory: + Automatically configures one check for every storage processor listed + in the agent output.