[checkmk-commits] Check_MK Git: check_mk: if.include now with assumed_speed_in/out support -> checkman update

Module: check_mk Branch: master Commit: 2fa34ee9ccdac6f53b20ec62f1e177e0eb9cdab2 URL: http://git.mathias-kettner.de/git/?p=check_mk.git;a=commit;h=2fa34ee9ccdac6… Author: Andreas Boesl <ab(a)mathias-kettner.de> Date: Fri Mar 1 10:55:56 2013 +0100 if.include now with assumed_speed_in/out support -> checkman update --- checkman/hpux_if | 8 ++++++++ checkman/if | 8 ++++++++ checkman/if64 | 8 ++++++++ checkman/if_lancom | 8 ++++++++ checkman/lnx_if | 8 ++++++++ checkman/mcdata_fcport | 8 ++++++++ 6 files changed, 48 insertions(+), 0 deletions(-) diff --git a/checkman/hpux_if b/checkman/hpux_if index 8b69ebf..4d1bb2d 100644 --- a/checkman/hpux_if +++ b/checkman/hpux_if @@ -81,6 +81,14 @@ parameters (dict): Due to its complexity, this check now uses a dictionary as are weighted higher than older values and that even values out of the configured time range are - to a low degree - represented in the average. If you configure an average, then the traffic levels are applied to the averaged values. + + {"assumed_speed_in"} - the assumed port input speed as an integer of the bits per second (not + the bytes!). If this value is not set the check takes the value configured in {speed} + before using the automatically detected port speed + + {"assumed_speed_out"} - the assumed port output speed as an integer of the bits per second (not + the bytes!). If this value is not set the check takes the value configured in {speed} + before using the automatically detected port speed {"state"} - the expected operational status of the interface (as string or list of strings. If this is {None} then the state is not checked. Possible values for the diff --git a/checkman/if b/checkman/if index 5d24dd3..8a6cd51 100644 --- a/checkman/if +++ b/checkman/if @@ -127,6 +127,14 @@ parameters (dict): Due to its complexity, this check now uses a dictionary as {"speed"} - the expected port speed as an integer of the bits per second (not the bytes!). If you set this to {None}, then the port speed is not checked. The default is to remember and enforce the port speed found during inventory. + + {"assumed_speed_in"} - the assumed port input speed as an integer of the bits per second (not + the bytes!). If this value is not set the check takes the value configured in {speed} + before using the automatically detected port speed + + {"assumed_speed_out"} - the assumed port output speed as an integer of the bits per second (not + the bytes!). If this value is not set the check takes the value configured in {speed} + before using the automatically detected port speed {"unit"} - the measurement unit which can be set to "bit" or "byte". Depending on this choice the limits set in the {"traffic"} parameter are regarded diff --git a/checkman/if64 b/checkman/if64 index 37232b1..b315470 100644 --- a/checkman/if64 +++ b/checkman/if64 @@ -127,6 +127,14 @@ parameters (dict): Due to its complexity, this check now uses a dictionary as {"speed"} - the expected port speed as an integer of the bits per second (not the bytes!). If you set this to {None}, then the port speed is not checked. The default is to remember and enforce the port speed found during inventory. + + {"assumed_speed_in"} - the assumed port input speed as an integer of the bits per second (not + the bytes!). If this value is not set the check takes the value configured in {speed} + before using the automatically detected port speed + + {"assumed_speed_out"} - the assumed port output speed as an integer of the bits per second (not + the bytes!). If this value is not set the check takes the value configured in {speed} + before using the automatically detected port speed {"unit"} - the measurement unit which can be set to "bit" or "byte". Depending on this choice the limits set in the {"traffic"} parameter are regarded diff --git a/checkman/if_lancom b/checkman/if_lancom index 9ce6d99..5c1ce57 100644 --- a/checkman/if_lancom +++ b/checkman/if_lancom @@ -130,6 +130,14 @@ parameters (dict): Due to its complexity, this check now uses a dictionary as the bytes!). If you set this to {None}, then the port speed is not checked. The default is to remember and enforce the port speed found during inventory. + {"assumed_speed_in"} - the assumed port input speed as an integer of the bits per second (not + the bytes!). If this value is not set the check takes the value configured in {speed} + before using the automatically detected port speed + + {"assumed_speed_out"} - the assumed port output speed as an integer of the bits per second (not + the bytes!). If this value is not set the check takes the value configured in {speed} + before using the automatically detected port speed + {"unit"} - the measurement unit which can be set to "bit" or "byte". Depending on this choice the limits set in the {"traffic"} parameter are regarded as bits or bytes, too. When this parameter is set to "bit" any traffic related plugin output diff --git a/checkman/lnx_if b/checkman/lnx_if index edc1e11..e264277 100644 --- a/checkman/lnx_if +++ b/checkman/lnx_if @@ -128,6 +128,14 @@ parameters (dict): Due to its complexity, this check now uses a dictionary as {"speed"} - the expected port speed as an integer of the bits per second (not the bytes!). If you set this to {None}, then the port speed is not checked. The default is to remember and enforce the port speed found during inventory. + + {"assumed_speed_in"} - the assumed port input speed as an integer of the bits per second (not + the bytes!). If this value is not set the check takes the value configured in {speed} + before using the automatically detected port speed + + {"assumed_speed_out"} - the assumed port output speed as an integer of the bits per second (not + the bytes!). If this value is not set the check takes the value configured in {speed} + before using the automatically detected port speed [configuration] if_inventory_porttypes (list of strings): List of interface types the inventory should create checks for. diff --git a/checkman/mcdata_fcport b/checkman/mcdata_fcport index e8ebd8f..cea5354 100644 --- a/checkman/mcdata_fcport +++ b/checkman/mcdata_fcport @@ -123,6 +123,14 @@ parameters (dict): Due to its complexity, this check now uses a dictionary as {"speed"} - the expected port speed as an integer of the bits per second (not the bytes!). If you set this to {None}, then the port speed is not checked. The default is to remember and enforce the port speed found during inventory. + + {"assumed_speed_in"} - the assumed port input speed as an integer of the bits per second (not + the bytes!). If this value is not set the check takes the value configured in {speed} + before using the automatically detected port speed + + {"assumed_speed_out"} - the assumed port output speed as an integer of the bits per second (not + the bytes!). If this value is not set the check takes the value configured in {speed} + before using the automatically detected port speed [configuration] if_inventory_porttypes (list of strings): List of interface types the inventory should create checks for.