ID: 2434
Title: NetApp monitoring: Cluster-Mode is now supported, changes in existing 7Mode
checks
Component: Checks & Agents
Level: 2
Class: New Feature
Version: 1.2.7i4
This update enables to monitor NetApp Filers running in Cluster-Mode.
The new <i>agent_netapp</i> is able to automatically detect whether the filer
is running in 7Mode or Cluster-Mode, so you only have to configure the
credentials in the datasource rule as usual.
Some of the existing 7Mode checks have been adjusted. Overall there are now less summary
checks available (e.g. fan, temperature, psu). You need to do a service discovery on each
NetApp filer.
The following table shows the list of available checks and the currently
supported NetApp mode.
<table>
<tr><th>Check</th><th>Description</th><th>7Mode</th><th>Cluster-Mode</th></tr>
<tr> <td>netapp_api_aggr</td> <td>Used space and trend of
aggregations</td> <td>X</td> <td>X</td></tr>
<tr> <td>netapp_api_volumes</td> <td>Used space an trend of
volumes. Able to record detailed performance data for each protocol</td>
<td>X</td> <td>X</td></tr>
<tr> <td>netapp_api_info</td> <td>Displays NetApp
version</td> <td>X</td> <td>X</td></tr>
<tr> <td>netapp_api_cpu</td> <td>CPU utilization of
nodes</td> <td></td> <td>X</td></tr>
<tr> <td>netapp_api_cpu.utilization</td> <td>CPU utilization for
7Mode filer</td> <td>X</td> <td></td></tr>
<tr> <td>netapp_api_cluster</td> <td>Cluster status</td>
<td>X</td> <td></td></tr>
<tr> <td>netapp_api_cpu.nvram_bat</td> <td>NVRAM battery
status</td> <td></td> <td>X</td></tr>
<tr> <td>netapp_api_disk.summary</td> <td>Disk summary check.
Includes total raw capacity and info about broken/spare ratio</td>
<td>X</td> <td>X</td></tr>
<tr> <td>netapp_api_fcp</td> <td>Fibrechannel interfaces traffic
and latency</td> <td></td> <td>X</td></tr>
<tr> <td>netapp_api_if</td> <td>Ethernet interfaces</td>
<td>X</td> <td>X</td></tr>
<tr> <td>netapp_api_protocol</td> <td>Read OPS / Write OPS for
each protocol (nfs, nfsv4, cifs, fcp, iscsci)</td> <td>X</td>
<td></td></tr>
<tr> <td>netapp_api_temp</td> <td>Temperature sensors, grouped by
shelf</td> <td>X</td> <td>X</td></tr>
<tr> <td>netapp_api_psu</td> <td>Power supplies</td>
<td>X</td> <td>X</td></tr>
<tr> <td>netapp_api_fan</td> <td>Fan status</td>
<td>X</td> <td>X</td></tr>
<tr> <td>netapp_api_snapvault</td> <td>Snapvault
Lag-time</td> <td>X</td> <td></td></tr>
<tr> <td>netapp_api_status</td> <td>Diagnosis status</td>
<td>X</td> <td>X</td></tr>
<tr> <td>netapp_api_vf_stats.traffic</td> <td>vFiler traffic
(Read/Write OPS, Net-Data Send/Recv, Read/Write Bytes)</td> <td>X</td>
<td></td></tr>
<tr> <td>netapp_api_vf_stats</td> <td>CPU utilization of
vFilers</td> <td>X</td> <td></td></tr>
<tr> <td>netapp_api_vf_status</td> <td>vFiler status, e.g
running</td> <td>X</td> <td></td></tr>
<tr> <td>netapp_api_vs_status</td> <td>vServer status, e.g
running</td> <td></td> <td>X</td></tr>
<tr> <td>netapp_api_vs_traffic</td> <td>vServer Traffic
Summary</td> <td></td> <td>X</td></tr>
</table>