Checkmk werks level2

checkmk-werks-lvl2@lists.checkmk.com

1 participants
1349 discussions

Check_MK Werk 3471: Repair ignoring discovery errors when bogus %s is contained in service description

by Mathias Kettner

ID: 3471 Title: Repair ignoring discovery errors when bogus %s is contained in service description Component: Core & Setup Level: 2 Class: Bug Fix Version: 1.2.9i1 This problem often appeard after an upgrade from 1.2.6 to 1.2.8 on monitored ESX servers.

8 years, 4 months

Check_MK Werk 3572: Added user login session idle timeout

by Lars Michelsen

ID: 3572 Title: Added user login session idle timeout Component: Multisite Level: 2 Class: New Feature Version: 1.2.9i1 It is now possible to configure a login session idle timeout globally or for each user individually. When a user logs in and leaves the GUI open without interacting with it, Check_MK does not invalidate the users login session. The login is valid until the user closes the window or logs out. With the new option enabled, it is possible to configure a maximum allowed idle time after which each user has to renew the login.

8 years, 4 months

Check_MK Werk 3469: Show type of rule match of a rule (first, per-parameter, all) in WATO

by Mathias Kettner

ID: 3469 Title: Show type of rule match of a rule (first, per-parameter, all) in WATO Component: WATO Level: 2 Class: New Feature Version: 1.2.9i1 This additional information makes it clearer to the user whether a just the first matching rule defines the parameter, or further matching rules can have influence, too.

8 years, 4 months

Check_MK Werk 3466: Logwatch pages now work in distributed environment without HTTH reverse proxy

by Mathias Kettner

ID: 3466 Title: Logwatch pages now work in distributed environment without HTTH reverse proxy Component: Multisite Level: 2 Class: New Feature Version: 1.2.9i1 The web pages for viewing and acknowledging files from logwatch checks now no longer need a HTTP reverse proxy setup but simply work. The use Livestatus - just like the other status data. This means that in the Enterprise Edition you can now drop the reverse proxying totally. In the Raw Edition you still need it for the performance graphs from PNP4Nagios. In a manual setup you need to tell the Livestatus Nagios-Module where it finds the logwatch files with the option <tt>mk_logwatch_path=.....</tt>. Specify the absolute path to the base directory where Check_MK stores the logwatch files. This path always ends with <tt>/logwatch</tt>. Note: You need to update Livestatus / Check_MK on all remote sites. If you just update the central site then the logwatch GUI will stop working.

8 years, 4 months

Check_MK Werk 3449: The host alias can now be used in BI aggregates

by Lars Michelsen

ID: 3449 Title: The host alias can now be used in BI aggregates Component: BI Level: 2 Class: New Feature Version: 1.2.9i1 When matching for hosts in BI aggregations it is now possible to match hosts with regular expressions by their host alias instead of the host name. Additionally it is now possible to use the host alias in the titles of the aggregations. Instead of using $1$ for matchin the host name or the host alias, you can now use the variables $HOSTNAME$ or $HOSTALIAS$ to use them in your BI rules.

8 years, 4 months

Check_MK Werk 3388: Event Console can now process SNMPv3 traps

by Lars Michelsen

ID: 3388 Title: Event Console can now process SNMPv3 traps Component: Event Console Level: 2 Class: New Feature Version: 1.2.9i1 The Event Console can now process SNMPv3 traps send with SNMPv3. To be able to receive the traps, you will have to configure the SNMPv3 credentials to be used for decrypting the received traps. This can be done in the Event Console configuration using the option <i>Credentials for processing SNMPv3 traps</i>. For each sending server you need to configure the credentials and the systems engine ID which is normally generated automatically by the SNMP device. Some devices also support setting engine IDs on your own. However, the SNMPv3 specification requires that each SNMP device has it's own unique engine ID. To be able to decrypt the traps you need to configure this engine ID together with the other SNMPv3 credentials for each trap sending device.

8 years, 5 months

Check_MK Werk 3418: Do not send host notifications if a service group is required

by Mathias Kettner

ID: 3418 Title: Do not send host notifications if a service group is required Component: Notifications Level: 2 Class: Bug Fix Version: 1.2.9i1 If you set a match condition on the service groups then for host notifications this condition was ignored. But a host cannot be in any service group so now if you use this condition then the rule will never match for host notifications. This should be the way that you expect this.

8 years, 5 months

Check_MK Werk 3386: AIX agent: Cached local scripts / plugins need to be configured in seconds

by Lars Michelsen

ID: 3386 Title: AIX agent: Cached local scripts / plugins need to be configured in seconds Component: Checks & Agents Level: 2 Class: Bug Fix Version: 1.2.9i1 When using cached executin of local scripts or agent plugins (putting scripts in subdirectories named like the execution interval) with the AIX agent, the directory names were interpreted as minutes which was not consistent with the other agents. This has now been changed to be consistently interpreted as seconds. You will have to rename your directories to the current name multiplied with 60 to execute the plugins again in the expected interval.

8 years, 5 months

Check_MK Werk 3027: mtr (Matt's traceroute): New agent plugin

by Andreas Boesl

ID: 3027 Title: mtr (Matt's traceroute): New agent plugin Component: Checks & Agents Level: 2 Class: New Feature Version: 1.2.9i1 mtr combines the functionality of the traceroute and ping programs in a single network diagnostic tool. For further information have a look at the mtr manpage. This plugin collects data for every hop to the destination address and creates a plethora of performance values for round trip average, package loss and standard deviation. Keep in mind that services for this new check require quite a large amount of RRD space, due to the large number of performance values. Roughly ~23MB for 10 network hops to a target destination.

8 years, 5 months

Check_MK Werk 3396: Change default setting of Precompile aggregations on demand to ON now

by Mathias Kettner

ID: 3396 Title: Change default setting of Precompile aggregations on demand to ON now Component: BI Level: 2 Class: New Feature Version: 1.2.9i1 The global setting {{Precompile aggregations on demand}} improves the performance of BI in case where not all aggregations are needed at once. This is especially true for the case of single-host aggregations. This setting now exists for a long time and we have finally regarded that feature as stable enough in order to make it the default. We might remove the setting from WATO totally in future.

8 years, 5 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Checkmk werks level2