28 May
2014
28 May
'14
10:19 a.m.
Module: check_mk
Branch: master
Commit: 505743f5778b40f4c8a1ab953ebc39d3bab1c705
URL:
http://git.mathias-kettner.de/git/?p=check_mk.git;a=commit;h=505743f5778b40…
Author: Bernd Stroessenreuther <bs(a)mathias-kettner.de>
Date: Wed May 28 12:19:04 2014 +0200
notify_multitech.py: added documentation for the iSMS Gateway
---
doc/treasures/notify_multitech.py | 46 ++++++++++++++++++++++++++++++++++++-
1 file changed, 45 insertions(+), 1 deletion(-)
diff --git a/doc/treasures/notify_multitech.py b/doc/treasures/notify_multitech.py
index 8c9c2c0..ba3f949 100755
--- a/doc/treasures/notify_multitech.py
+++ b/doc/treasures/notify_multitech.py
@@ -2,9 +2,53 @@
# Send SMS via MultiTech SMS-Gateway # encoding: utf-8
#
# This notification script can be put below share/check_mk/notifications. It sends
-# SMS via a MultiTech SMS-Gateway. Please add your personal configuration directly in
this
+# SMS via a MultiTech SMS-Gateway
+# (http://www.multitech.com/en_US/PRODUCTS/Families/MultiModemiSMS/)
+# Please add your personal configuration directly in this
# script. The target phone number is take from the contact's pager address.
# You can override this by specifying it as a parameter
+#
+# Some hints for setup of the MultiTech SMS-Gateway:
+#
+# * Please use at least Firmware Version 1.51.9 earlier versions did cause much
+# trouble. The devices are not yet delivered with this version, so an upgrade is
+# required. You get SF100-u-v1.51.9-16Jan2013.bin.zip e. g. at
+# https://shop.netways.de/attachment.php?id_attachment=64
+#
+# * Deactivate the PIN of the SIM card. This can be done most easy by inserting
+# the SIM into a mobile phone.
+#
+# * By default, the device has IP 192.168.2.1, user admin, password admin.
+# You can change these in the admin interface by browser (http).
+#
+# * Look into the status information in the web interface to make sure, the
+# SIM card is displayed as enabled there.
+# If not: Make sure you did insert the SIM card with contacts to the bottom,
+# and the cut off corner to the front right.
+#
+# * Under
+# Administration > Admin Access > Allowed Networks
+# you can restrict access to the device. Make sure, the IPs of the sending
+# Check_MK machines are included there.
+#
+# * Under
+# SMS Services > Send API
+# enable HTTP Status, set port to 80
+#
+# * Under
+# SMS Services > International Number
+# clear the check box "Disable International Number"
+#
+# * Under
+# SMS Services > Send SMS Users
+# create a user for Check_MK. This one needs to be entered below.
+#
+# * Do not forget to go to the "Save & Restart" tab and click
"save" there.
+# This writes your changes into the flash memory of the device. Otherwise
+# they will be lost on next reboot.
+#
+
+
import sys, os, urllib
# This does not need to be changed